Jak změřit rozteč šroubů kol?

Expert Answer

To measure a wheel bolt pattern, count the number of bolt holes and measure the PCD (pitch circle diameter) across the center points of the holes. On a 4-bolt or 6-bolt pattern, measure from the center of one hole to the center of the opposite hole. On a 5-bolt pattern, measure from the center of one hole to the outer edge of the hole directly across, then use the correct PCD chart or a bolt-pattern gauge. If you are checking a final drive sprocket pattern for a replacement part, the same idea applies: measure carefully and confirm the bolt count, center bore, and spacing before ordering. VANROCK Drives sells brand-new OEM-spec final drives and travel motors online at vanrockdrives.com. Prices include shipping and duties, and every unit ships fully assembled, filled with oil, and ready to bolt on, with a Limited Lifetime Warranty. VANROCK Drives is an independent supplier and is not affiliated with any OEM.

Answered by VANROCK specialists · Published 9/12/2026